Richards Thermocouple Cat17 Brn

Angle Assemblies - Metal Tubes - Alloy Bent -Types E, J, K & N

Easy to Order - 1 - State quantity 2 - Specify the part number

Example: The part number 8K6AB-1012XH-12-18-SH signifies an gauge, Type K, alloy bend angle Assembly , 12” long hot leg made from a bent 1/2” NPT Extra Heavy #10 alloy tube (32% Nickel-21% Chromium), 18” long cold leg made from a steel balance pipe, and a Standard Head ( SH ). Other combinations of thermocouples and tubes can be specified depending on your application. ! Note: If you would like to order a Type E, J, or N assembly, just substitute the “ K ” with an E, J, or N in the part numbers listed on this page.

(ours or competitive) 3 - Specify the hot ( H ) and cold leg ( C ) lengths. Multiples of 6” (152.4 mm) starting at 12” are stocked 4 - Add letters for mounting attachments 5 - For Double Element Assembly add a “ D ” to the part number. 8K6ABD-601-12-18-SH

Typical

Protection

Wire

Pipe

Outside Diameter

Application

Tube

Gauge

Size

Type K

Inches

mm

316SS Maximum service temperature 1600°F (780°C) in oxidizing atmospheres. Considered better than 304SS on corrosion. 310SS Maximum service temperature 2100°F (1150°C) in oxidizing atmospheres. Resists heat scaling. Carbon Steel Maximum service temperature 1000°F (540°C) in non-oxidizing applications. Typically used in galvanizing, tin, molten babbit, molten magnesium, petroleum applications and water lines. HR-160 Maximum service temperature 2200°F (1204°C) in oxidizing and reducing atmospheres. Excellent re- sistance to sulfur, chlorides, and hot corrosion. Typically used in waste incineration.

8K6AB-1601-H-C-SH 8K6AB-1634-H-C-SH 8K6AB-1634XH-H-C-SH 8K6AB-1612XH-H-C-SH 11K6AB-1638-H-C-SH 14K6AB-1638-H-C-SH 8K8AB-2001-H-C-SH 8K6AB-2034-H-C-SH 8K6AB-2022-H-C-SH 11K6AB-2014-H-C-SH 14K6AB-2014-H-C-SH

8 8 8 8

1” Std 3/4’ Std 3/4” XH 1/2” Std 3/8” Std 3/8” Std 1” Std 3/4” Std 1/2” XH 1/4” Std 1/4” Std

1.32 1.05 1.05

33.4 26.7 26.7 21.3 13.7 17.2 33.4 26.7 21.2 13.7 13.7

#16 Seamless Stainless Steel Nickel 10-14%, Chromium 16-18% Molybdenum 2-3%, Manganese 2% Silicon 1%, Phosphorous .045% Carbon .08%, Sulfur .03% #20 Seamless Stainless Steel Chromium 24-26%, Nickel 19-22% Silicon 1.5%, Manganese 2% Carbon .25%, Phosphorous .045% Sulphur .03%, Iron (Balance)

.84 .68 .68

11 14

8 8 8

1.32 1.05

.84 .54 .54

11 14

#(SS) Seamless Carbon Steel Extra Heavy wall ( XH ) Double Extra Heavy wall ( DXH )

8K6AB-SS01XH-H-C-SH 8K6AB-SS34XH-H-C-SH 8K6AB-SS12XH-H-C-SH

8 8 8

1” XH 3/4” XH 1/2” XH

1.32 1.05 .84

33.7 26.7 21.3

#160HR Seamless Nickel Alloy Nickel 37%, Cobalt 30%, Chromium 28%, Iron 3.5% Silicon 2.75%, Molybdenum 1% Tungsten 1%, Manganese .5% Titanium .5%, Carbon .05%

8K6AB-160HR34XH-H-C-SH

8

3/4” XH

1.05

26.7

Cold leg of thermocouple = C Hot Leg of Thermocouple = H

Page 68

Phone: 617.527.4385 Fax: 617.964.3746 Email: sales@asrichards.com