Richards Thermocouple Cat17 Brn

TS2S MB & SAB

Manufacturing, Engineering and Sales Since 1938

Phone: 617.527.4385 Fax: 617.964.3746 Email: sales@asrichards.com

Plastic Industry Thermocouples - Melt Bolt and Spring Adjustable Bayonet

Melt Bolt Thermocouples are used to measure plastic melt temperatures as the material moves down the barrels in extruders and injection molding equipment. The Special Limits of Error element and heavy duty bolt are both constructed from 304 stainless steel. The Element is a MgO type with A grounded junction is standard for a rapid temperature response time. The extension and 3/16” diameter 304 stainless steel tip lengths can be specified for your application. Melt Bolts can be with 1/2” - 20 N.F. thread lengths of 3”, 4”, 6”, and 9”. Plugs connectors, if used, are made with solid pins. ! If you would like to order a Type E, J, N, or Type T assembly, just substitute ” K ” in the catalog number with an E, J, N, or T. Example: MBTJ-3-5-1-J1 (Type J, Melt Bolt thermocouple, 3” long bolt, 5” extension, 1” tip, a male plug).

K1 plug

Y

E

X

Bolt Lengths (X)

Wire Gauge

Type K

Application

Type K

Melt Bolt Thermocouples (MBT) Bolt Thermocouples are machined from solid 304 stainless steel bar stock for corrosion resistance. The elements are constructed with MgO insulation for maximum temperature resistance. The tips are 3/16” in diameter and also made from 304 stainless steel. All melt bolts have a 1/2” - 20 N.F. thread for ease of installation. The extension portion of the thermocouple can be bent to suit your application. K1 is the catalog number for a K plug.

MBTK-3-E-Y-K1

3”

MBTK-4-E-Y-K1

4”

20

K

1

MBTK-6-E-Y-K1

6”

MBTK-9-E-Y-K1

9”

Spring Adjustable Bayonet immersion type thermocouples give you the flexibility to adjust to a variety of well depths from 1” to 7” by use of an 8” adjustable spring. The bayonet adapter allows the thermocouple to be quickly disconnected from the process. This type of thermocouple is frequently used in the plastic Industry. A 304 Stainless Steel overbraid is for abrasion resistance on the impregnated fiberglass insulated 20 gauge stranded wire. The tips are 3/16” diameter made with 304 Stainless Steel. A grounded junction is standard to help prevent element from pulling out of the tube and to provide a rapid response time. ! If you would like to order a Type E, J, N, or Type T assembly, just substitute the ” K ” in the catalog number on this page with an E, J, N, or T.

Example: SABJ-OB8-J1-24 (Type J, thermocouple, a male plug and 24” long.)

*

Wire Gauge Type

Application

Style

Type K

Spring Adjustable Bayonet Thermocouples (SAB) Spring Adjustable Bayonet thermocouples have a maximum service temperature of 900°F (482°C) due to the rating on the fiberglass inner insulation. The elements have impregnated fiberglass insulated wire with a 304 stainless steel overbraid. The tips are 3/16” in diameter and are made from 316 stainless steel.

SABK-OB8-*

Plain

SABK-OB8-K1-*

20

K

Plug

1

SABK-OB8-K3-*

Plug & Jack

Visit our website at www.asrichards.com

Page 47