Richards Thermocouple Cat17 Brn

TS4 CERAMIC

Manufacturing, Engineering and Sales Since 1938

Phone: 617.527.4385 Fax: 617.964.3746 Email: sales@asrichards.com

Straight Assemblies - Ceramic Tubes - Types E, J, K & N - Screw Cover Heads

The Richards Screw Cover Head makes inspection of the thermocouple easy. Unscrew the cover without disconnecting the leads. The single element can now be pulled out for inspection. The element is installed into the connector without bending, which prevents the insulators from cracking. If the element needs to be replaced, simply unscrew the two terminals and install a new one. The cover will never get dropped or lost since the extension wires pass through the center. The cover and bushing are cast iron, which have been coated and waxed to help prevent

Straight Assemblies Configuration 4

*

P06HXPJ

1

1.5”

*

2

P11F Mullite

*

P11N Mullite

3

P11N9-Z-* Mullite

4

SCB Silicon carbide

5

P11N9 -Z-* are composed of a ceramic tube with a nipple of specified length “ Z ”. If the length is not specified then it is assumed to be the standard length of 6” (152.4 mm). The number “ 9 ” signifies # 9 Alloy which is standard. Other alloy codes can be used (see codes on page 97) Example: The part number 8K4-P11N9-4-24 signifies a 24 gauge, Type K complete assembly , 11/16” OD Mullite tube, 24” long, a #9 alloy nipple 4” long,

SCI Silicon carbide

6

SCF Silicon carbide

7

Visit our website at www.asrichards.com

Page 17