Richards Thermocouple Cat17 Brn
Manufacturing, Engineering and Sales Since 1938
AC
Phone: 617.527.4385 Fax: 617.964.3746 Email: sales@asrichards.com
Accessories - Mounting
Fitting - For Cementing to Ceramic Tubes
Part
Tube Size
Pipe Thread
Overall
Number
Material Inch-
Length
Notes
Figure
mm
Process
Head
F1208 F1612 F2016
.69 1.00 1.25 69 1.00 1.25
17.5 25.4 31.8 17.5 25.4 31.8
3/4” NPT 1” NPT 1 1/4” NPT 3/4” NPT 1” NPT 1 1/4” NPT
1/2” NPT 3/4” NPT 1” NPT 1/2” NPT 3/4” NPT 1” NPT
1 3/4” 2” 2 1/4” 1 3/4” 2” 2 1/4”
1
Steel
Cemented to ceramic tubes to provide male process and Instrument connection threads.
FSS161208 FSS161612 FSS162016
316 Stainless Steel
Fitting ( F )
Fitting for Silicon Carbide Tube - Cast Iron
Part
Bore
Diameter
Length
Number Inches mm Inches mm Inches mm
Notes
Figure
2
Holds plain silicon carbide tubes with three set screws and provides 3/4” female NPT threads to mount a connection head or elbow. 1/2” and 1” NPT are also available.
FSC2412
1.75
44.5
2.5”
63.5
2.4
61.0
Fitting, Silicon Carbide Tube ( FSC )
Floor Flange - Cast Iron
Part
Female Pipe
Number Diameter
Height
Thread
Notes
Figure
Used to provide a female NPT thread to mount thermocouples or RTDs in process equipment. 1 1/4” NPT ( FF20 ) is recommended as the default , as it provides the option of reducing to smaller sizes if needed with a bushing.
FF02 FF04 FF06 FF08 FF12 FF16 FF20
2.375 2.375 2.625 2.625 3.500 4.000 4.000
.500 .500 .500 .625 .625 .625 .750
1/8” NPT 1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1 1/4” NPT
3
Floor Flange ( FF )
Grommets - Rubber
Part
Bore
O.D.
Thickness
Number Inches mm Inches mm Inches mm
Notes
Figure
Rubber Grommets are used to provide strain relief for thermocouple wires con- nected to plugs and jacks.
Rubber Grommets ( GRM ) 4
GRM00 GRM03 GRM04
.055 .127 .140
1.40 3.23 3.56
2.50 2.50 3.13
6.35 6.35 7.95
.060 .250 .313
1.53 6.35 7.95
Visit our website at www.asrichards.com
Page 129
Made with FlippingBook - Online catalogs