Cat16 R2

Manufacturing, Engineering and Sales Since 1938

TA6 Elbow

Phone: 617.527.4385 Fax: 617.964.3746 Email: sales@asrichards.com

Straight Assemblies - Metal Tubes and Elbow - Types E, J, K & N

The Richards Standard Head ( SH ) (Aluminum) is the most versatile head we offer. This head has a NEMA 4 rating for indoor or outdoor use in non-hazardous locations. The cover and body have been polished to help prevent corrosion. The cover has a special silicon gasket, which helps protect the connector block from wind-blown rain and dust. This gasket is also press fit into a grove to keep it from falling out when the cover is removed for inspection. A stainless steel chain is attached to the cover and body to prevent it from getting misplaced. One of the most beneficial advantages to this type of head is the variety of connector blocks which can be used. The Standard Head ( SH ) can also be fitted with our in-head style transmitters ( TS ).

Angle Assemblies Configuration 6

C

Note: If you would like to order a screw cover head, remove the ( SH ) from the end of the part number.

C = Cold Leg

Example: 8K6-1012XH-12-18

H = Hot Leg

H

3/4” Pipe Size

1/8” Pipe Size

1/4” Pipe Size

3/8” Pipe Size

1/2” Pipe Size

SP Pipe Size

1” Pipe Size

C

H

Element for angle assembly

Jab Style plug termination for angle assembly, add termination number to end of the part number. Example: BR08-K7 (Type K for 1/2”NPT pipe)

Optional Union Elbow Change “ 6 ” to “ 6U ” in the part number

Visit our website at www.asrichards.com

Page 63