Cat16 R2

TS4 CERAMIC

Manufacturing, Engineering and Sales Since 1938

Phone: 617.527.4385 Fax: 617.964.3746 Email: sales@asrichards.com

Straight Assemblies - Ceramic Tubes - Types B, R & S - Standard Head, Aluminum

The Richards die cast aluminum Standard Head ( SH ) is the most versatile head we offer. This head has a NEMA 4 rating for indoor or outdoor use in non-hazardous locations. The cover and body have been polished to help prevent corrosion. The cover has a special silicon gasket, which helps protect the connector block from wind-blown rain and dust. This gasket is also press fit into a grove to keep it from falling out when the cover is removed for inspection. A stainless steel chain is attached to the cover and body to prevent it from getting misplaced. One of the most beneficial advantages to this type of head is the variety of connector blocks which can be used. The Standard Head ( SH ) can also be fitted with our in-head style transmitters ( TS ).

Straight Assemblies Configuration 4

1

P06HXPJ Alumina

2

AP06N Alumina

*

3

AP11F Alumina

AP11N9 & AP06N9 are composed of a ceramic tubes with a nipple of specified length “ Z ”. If the length is not specified then it is assumed to be the standard length of 6” (152.4 mm). The number “ 9 ” signifies # 9 Alloy which is standard. Other alloy codes can be used (see codes on page 97) Example: The part number 24S4-P06N9-4-24-SH signifies A 24 gauge, Type S complete assembly , 3/8” OD Mullite tube, 24” long, a #9 alloy nipple 4” long, and a Standard Head ( SH ). Other combinations can be specified depending on your application.

*

Z

AP11N9 Alumina

4

Z

P06N9 Mullite

5

P11F Mullite

6

P11N Mullite

7

Visit our website at www.asrichards.com

Page 21