001 Front Cover

De-tectors t Assemblies

Resistance Temperatu re RTD Elements and

RTD Elements ^And Assemblics' { Sl6ss, 114" Dia., European Curve, Element { *O.O4o/o r*sistance or t0.1'C Accuracy

Standatd Features / l ooo Resistance

/ Four Wire Lead Configuration ,/ Max, Temp. 400'C (752"F) or High Temp, Option 650"C (1 2O2"F)

/ rueea To Customize Your Assembly? - Fine Tune The Part Number After locating a standard part number, you can fine tune the assembly for your application. lf you require an American curve (0.00392) sensol and not the standard European curve (0.00385), substitute the "E" with an "A" in the part number. lf you require a 500e and not the standard 100C1 sensor, substitute the "1" in the pad number with a "5". 1000c) sensors can be ordered by changing the "1" to a "K". Substitute the "16" in the part number with your sheath material code requirements (1 6 or 31 6ss is stan- OarO). Otner material codes are listed on the opposite page. RTD elements and assemblies are provided in four wire configura- tions as standard. This is the most accurate configuration. Note if you require a three wire RTD element, this can be designated by substituting the "4" in the part number with a "3". Two wire RTD's can be specified by substituting the "4" with a "2" in the part number.

RTD Elements And AssembliGs'

1/9" (.125)

4E162-1-X-Y

Plain Probe

European (0.00385)

3/16" (.188)

4E163-1-X-Y

Plain probe with teflon leads.

114" (.250)

4E164-1-X-Y

Probe, Compression Fitting Plain probe with teflon leads and 316 stainless steel compression fitting (CF). Probe, For.weld Facing Bushing Plain probe with teflon leads and fonruard facing 112" male NPT bushing (B). Probe, Reet Facing Bushing Plain probe with teflon leads and rear facing 1 12" male bushing (RB). Probe, l/2" x l/2" Hex Fitting Plain probe with teflon leads and 112" x112" male NPT hex fittins (HX). Probe, Nlele Jack & Female Plug Plain probe with mating standard (Round Pin) plastic male jack and female plug (P3).

1/8" (.125)

48162-1-X-Y-CF

E uropean (0.00385)

3116" (.188)

4E163-1-X-Y-CF

114" (.250)

4E164-1-X-Y-CF

1/9" (.125)

4E162-1-X-Y-B

E uropean (0.00385)

3/16" (.188)

4E163-1-X-Y-B

114" (.250)

4E164-1-X-Y-B

1/8" (.125)

4E162-1-X-Y-RB

European (0.00385)

3/1 6" (.188)

4E163-1-X-Y-RB

114" (.250)

4E164-1-X-Y-RB

1/8" (.125)

4E162-1-X-Y-HX

E uropean (0.00385)

3/16" (.188)

4E163-1-X-Y-HX

114" (.250)

4E164-1-X-Y-HX

1/8" (.125)

4E162-1-X-P3

E uropean (0.00385)

3/16" (.188)

4E163-1-X-P3

114" (.250)

4E164-1-X-P3

X = Overall Length Y = Probe or lnsertion Length Note: Foranlnconel sheath(Alloy#9),substitutethe"15" inthepartnumberwitha"9". Otherspecial alloysavailable

Page 148