001 Front Cover
Manufacturing, Engineering and tales Since lgiS
617-527-4385 Fax: 617-964-3746
E-Mail: sales@asrichards.com
Phone:
Accessories - Mounting
Tube [silicon Carbidef Support Flange - Steel
Diameter- 4.875' or 123.83mm Height- 2.375 or 60.33mm
This steel protection tube mounting flange is used to mount thermocouple assemblies, which have silicon carbide tubes with a collar (SCC). The assembly consists of a three hole mounting plate, gasket, and support flange.
Unions - 3I(, Stainless Steel
x Female 112"
uN0808
Female 112"
Male 112" x Male 112" Male 112" xFemale 112"
316 Stainless Steel
UNO8OSA
UNOSOSB
UNOSOSA
W
Union Elbows - Cast lron
3
112" x 112" Female NPT 314" x 314" Female NPT 1" x 1" Female NPT
Provides a adjustable elbow from zero to 90 degrees for use on angle thermocouple assemblies. Allows for easy dismantling of the assembly. Sturdy cast iron construction. Note the elbows may not provide a gas tight seal.
uE0808 uEl212 uEl616
ffi ti EIbow(uEI
Welding Fittings - Canbon Steel
w1204 w1206 w1208 w1604 w1606 wl608 w1612 w2006 w2008 w2012 w2016 w2408 w2412 w2416 w2420 w3208 w3212 w3216 w3220 w3224
314' NPT 314" NPT 314" NPT
1.02', 1.02', 1.02" 1 .33" 1.05" 1.05" 1.32" 1.20" 1.20" 1.20', 1.20', 1 .33" 1.26" 1.31" 1 .31" 1 .39" 1 .39" 1 .39" 1 .39" 1 .39"
25.91 25.91 25.91 33.78 26.67 26.67 33.53 30.48 30.48 30.48 30.48 33.78 32.00 33.27 33.78 35.31 35.31 35.31 35.31 35.31
1/4" NPT 3/8" NPT 1/2" NPT 1/4" NPT 3/B'' NPT 1/2'' NPT 314' NPT 3/8" NPT 1/2" NPT 314" NPT 1'' NPT 1/2" NPT 314' NPT 1" NPT 1 114" NPT 'l12" NPT 314" NPT 1'' NPT 1 114' NPT 1 112" NPT
Machined bushings can be welded on to metal protection tubes to provide a gas tight seal on the process connection. Steel fittings are provided as the standard. Stainless steel fittings are also available. Add 316S5 or 304SS to the end of the paft numbers listed at left.
1'' NPT 1'' NPT 1" NPT 1'' NPT
1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/2" NPT 1/2" NPT 1/2" NPT 1/2" NPT
2'' NPT 2" NPT 2'' NPT 2" NPT 2" NPT
25
Page 1
Visit our Web Site At www.AsRtcHARDs.coM @ @@
Made with FlippingBook